Phone: +263 778 121 179 +263 771 964 344 | +263 783 454 358
IBR 686
The profile shall have five trapezoidal ribs at 171.5mm centres giving a nett cover of 686mm with each pan incorporating one stiffener rib. The rib height shall be 37mm.Roof PitchIBR may be used at a minimum roof pitch of 5° for rafter lengths up to 30m. A minimum of 7.5° is required for rafter lengths greater than 30m. Cranking IBR 686 can be cranked from a minimum radius of 409mm for material thicknesses of 0.5mm, 0.53mm and 0.58mm. Cranking IBR 686 can be cranked curved to any radius greater than 800mm subject to transportation limits.
Corrugated
This profile has a tranquil appearance, is relatively light, easy to handle and provides an economical coverage per unit mass. Available in transportable lengths. Corrugated 10.5 sheeting can be embossed for thicknesses not less than 0,5mm. Embossing provides a quality, textured finish to the sheet and reduces glare, minimises potentially unsightly “oil canning” and enhances the appearance of a metal-clad building.